Similar
BE SURE TO READ ENTIRE TEXT! NOS Fram Bypass oil filter similar to units used on Okrasa, Porsche and other Vintage Speed Engines. This filter takes the C3 filter insert. This is a completely restored unit that is ready to be used. The canister, top and bracket have been cleaned, media blasted and painted. New decals have been installed.The pictures show the excellent condition. Please note this...
Quality rebuilt German Pierburg fuel pump. This is the dual diaphragm model as used on 1300/1500/1600 VW engines. A new rebuild kit was installed. Rebuild process included disassembly & light media blasting. The new diaphragm was correctly pre-loaded during reassembly. The mounting and mating surfaces were checked and resurfaced as needed. All parts such as check valves, springs and seats check...
over a month agoMillville, NJTools for Sale
LAGLER HUMMEL FLOOR SANDER W OF CORD AND ELECTRIC BOX W ALLIGATOR CLIPS HARVESTER FLOOR EDGER CLARKE AMERICAN B- FLOOR EDGER (NEEDS ARMATURE WORK) HARVESTER FLOOR SANDER BUFFER W HP BALDOR MOTOR POWER NAIL MODEL MANUAL FLOOR NAILER W MALLET BLACK amp DECKER D DOOR JAM SAW HARVESTER UNDER RADIATOR CABINATE EDGER PORTER CABLE SHEET VIBRATOR FINISHING SANDER Photos and contact info on Advertigo we...
$1,800

Judson

Judson II for 40 HP engines. This is a complete kit. Parts included pictured are the supercharger, spacer, air filter, bottom pulley, belt tensioner, Judson Electronic coil, NOS Ampco oiler, Solex 30PICT-1 w/linkage adapter and lower bracket. The carb will be set up for 6 or 12 volt as needed. Also include not pictured are the proper length carb studs. I was going to install this on my OG '63 R...
Quality rebuilt/restored German Pierburg 36 HP fuel pump. This is the 1958 high top style as used on 36 HP engines. Rebuild process included disassembly and light media blasting. The new diaphragm was correctly pre-loaded during reassembly. The mounting and mating surfaces were resurfaced and checked. All parts such as check valves, springs and seats checked and resurfaced or replaced as needed...
Quality rebuilt German 36 HP fuel pump. This is the mid '56 low top style as used on '56 & '57 36 HP engines. Rebuild process included disassembly and light media blasting. The mounting and mating surfaces were checked and resurfaced as needed. All parts such as check valves, springs and seats checked and resurfaced or replaced as needed. The new diaphragm was correctly pre loaded during reasse...
Gm performance ls2 block. Arp main studs, arp head bolts, liberty performance 4 forged crank, scat i-beam rods, wiseco pistons.. cam motion cam .590/.613 234/244, ls7 lifters, 317 heads redone, pac springs, melling oil pump Engine has 500 miles and about 30 1/8 mile passes , went mid 5 s with a procharger in a 3200lb car Brand new Ls1 8/71 set up the blower shop Teflon high helix black anodized...
over a month agoElmer, NJ+16 milesBusiness Inventory for Sale
Cat C32 Engine, 1125 Adv. Horsepower, 6 Feeder Chain, 6 Rotor Width, 5 Discharge Conveyor, Bel-Aire Air Compressor, Honda Water Pump ***Please see attached maintenance / repair records***
Rebuilt/restored Round Bowl Solex 30 PICT 1 as used on 1967 1500 engines. This is the best version of the round bowl 30, the VW 105-1 with the power fuel system. This model was standard on US 1967 VW Beetles. This carb was soaked in carb cleaner. The castings were lightly media blasted to restore the original appearance. Then all ports were thoroughly cleaned with high pressure air. The hardwar...
Rebuilt /restored Solex 28 PCI Carb. The body and top were soaked in carb cleaner. The base and top castings were lightly media blasted to restore the finish. The mounting and mating surfaces were resurfaced as needed. Then, all ports were cleaned out with high pressure air. Steel linkage and hardware were media blasted, zinc/tin electroplated and buffed. A high quality rebuild kit including ga...
1 + ... Next >